Skip to Content

Wall niche · New

Solid. The niche that belongs to the wall.

Flush-mounted in the shower and bathroom. A body made in one piece, waterproofed at the factory and ready to tile.

1.4301Body in stainless steel V2A, or aluminium
30 × 30 · 30 × 60 cmtwo formats
7 finishesbrushed, PVD or structure-coated

Build-up

Waterproofed before it arrives.

The surrounding flange is joined to the waterproofing membrane at the factory. On site it only has to be bonded into the bonded waterproofing; there is no bricklaying and no reworking.

The back panel is closed and flush, so there is no joint where dirt can collect.

From shell to tile.

Keep scrolling: three steps, one picture.

Fit and waterproof.The niche sits in the stud wall and the flange bonds into the bonded waterproofing.
Choose the finish.Four stainless steel finishes and three textured powder-coated aluminium tones.
Tiled and finished.Only the edge remains visible, flush with the tile.

Technical data.

MaterialStainless steel 1.4301 / V2A (AISI 304) or textured powder-coated aluminium
Formats300 × 300 mm · 300 × 600 mm
Installation depth100 mm, for stud wall installation
FinishesBrushed stainless steel · brushed gold (PVD) · brushed bronze (PVD) · brushed anthracite · textured powder-coated in anthracite, grey or beige
WaterproofingWaterproofing membrane fitted at the factory, connects to the bonded waterproofing system
ApplicationShower, bathroom and wet room; new build and renovation

Ordering information.

14 variants.

Item numberSizeSurfaceMaterial
SN3-W300L300E9300 × 300 mmBrushed anthraciteStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L300E7300 × 300 mmBrushed bronze (PVD)Stainless steel 1.4301 / V2A (AISI 304)
SN3-W300L300E4300 × 300 mmBrushed gold (PVD)Stainless steel 1.4301 / V2A (AISI 304)
SN3-W300L300E1300 × 300 mmBrushed stainless steelStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L300A19300 × 300 mmtextured powder-coated, anthraciteAluminium
SN3-W300L300A21300 × 300 mmtextured powder-coated, beigeAluminium
SN3-W300L300A20300 × 300 mmtextured powder-coated, greyAluminium
SN3-W300L600E9300 × 600 mmBrushed anthraciteStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600E7300 × 600 mmBrushed bronze (PVD)Stainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600E4300 × 600 mmBrushed gold (PVD)Stainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600E1300 × 600 mmBrushed stainless steelStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600A19300 × 600 mmtextured powder-coated, anthraciteAluminium
SN3-W300L600A21300 × 600 mmtextured powder-coated, beigeAluminium
SN3-W300L600A20300 × 600 mmtextured powder-coated, greyAluminium

Special lengths on request. Every channel can be cut to size on site.

Installation in five steps.

The order follows the site: shell first, tile last.

ShellCut the opening in the stud wall, fit the niche and align it.
FixingFix the body and lay the flange flat against the wall surface.
WaterproofingBond the factory-fitted waterproofing membrane into the adjoining bonded waterproofing system, then seal the wall.
Tiling workTile the wall up to the edge and grout the joints.
FinishingPeel off the protective film last.